本公司XGYN液压型高配捏炼机型号：35L/55L/75L/110L，其主要特点如下特点如下： 上压砣油缸由差动增压回路控制。无回弹、不喷粉。保证配方准确。 压砣与改形后混炼室组成完整的混炼腔，配合小切入角的(S)形转子，提高了吃粉速度。提高了胶料质量。 转子轴向定位可靠。轴端采用套筒缸恒压密封，比压可调，延长定环（密封件）的使用寿命。密封可靠。不漏粉、不漏胶、不向密炼室内漏油。 XGYN型翻斗密炼机的压料装置与捏炼室在炼胶时由液压锁紧装置链接为一体。加料及操作空间加大，方便舒适。并为上辅机地安装留有空间。 液压倾翻缷料（非油缸直推）。可倾翻140度以上。如需倾翻140-160度时，定货时请说明。 XGYN型翻斗密炼机为人字速比齿轮传动，转子超静定支承。电机布置合理。传动结构简单明了，维护保养方便。 XGYN型翻斗密炼机系列占地面积缩小，不需压缩空气设施，可与下落式密炼机相媲美。同样地有效容量，同样的效率。仅一半的价格。 Advanced New Series Milling Equipment XGYN型(new style hydraulic control) Bucket Tipping Kneader Production feature: Oil cylinder of the upper ram controlling by differential pressure loop, can’t be spring back of milling, overcoming powder spray to guarantee accuracy of the formula. The ram and the mixing chamber forms into an integrated mixing antrum, cooperate with the digging angle of (S model) rotor to increase the powder feeding speed and the rubber material’s quality. The rotor has reliable fixed position, the shaft head uses sleeve pot of sealed, constant and adjustable pressure, which can extend the service life of the seal elements, avoid powder rubber and oil leakage. XGYN bucket tipping kneader, the swaging equipment and the mixing chamber can join together by hydraulic locking device, making the material feeding and operation place bigger, convenient and comfortable. And keep space to install auxiliary engine Hydraulic pressure (un fuel tank pushing), tipping degree over 140°. Please inform us, if 140-165°is required. XGYN bucket tipping kneader, improved much in transmission design. zig-zag speed ratio gear driving, hyper-static bearing of the motor, reasonable electric arrangement. Brief and clear transmission structure, convenient maintaining. XGYN bucket tipping kneader needn’t air compression equipment, reducing floor space, can compare to the same size dropping kneader. Same available capacity and efficiency, but half price.